Technique of 3D Digitizing

There is lot of buzz about 3D technology all around the world. From the 3D movies to virtual 3D gadgets, everything is transforming into 3D. So does the digitizing. 3D digitizing is the new trend in the market and companies or brands demand to digitize their logos in the 3D form. And for the commercial purposes, 3D digitize designs are a new trend in the market. For that, clothing markets are investing heavily in the digitizing and because of that many digitizing companies are also looting their clients. If you have a plan to get the 3D digitizer services too, then Cheap Digitizing is the perfect hand that you can grab. Keep digging into this article to find the method of 3D digitizing so you can save yourself next time from the corruption of digitizing companies.

Technique:

Digitizing a 3D design is very simple yet embroidery digitizing companies present it as the most complex and difficult work in the world. The digitizing technique of 3D is very similar to the digitizing technique which is use to get the applique designs digitize. But for the placement some different types of tactics like tacks and cover stitches are required to give it the proper shape. The element that create the difference is a cover stitch. It also cut the foam from which we get the high-density Satin stitch.

Foam Selection:

Only the professional embroidery digitizer can identify the perfect foam which will be suitable for the article on which you want to get you 3D digitizing design attached. Quantity of the foam also matters because the excess foam has to be removed after stitch-out. So if you buy foam in excess, it will be wasted and the 3D digitizing cost you more. Also when you use too much foam it become stiff and strong which create some problems in cutting and sometimes it also damages the embroidery.